Alaabta
Buuxinta Fiber-ka-buuxinta Jeelka-Galka Fiber-ka
Hordhac Product
Fiber-buuxinta jel-ka-buuxinta waa koollada cad-cad, oo ka kooban saliidda saldhigga, buuxinta aan organic, dhumuclaha, nidaamiyaha, antioxidant, iwm., kuleylinta qayb gaar ah iyo homogenized in kiliyaha falcelinta, ka dibna shiida kolloid, qaboojinta iyo degesinta.
Fiilada indhaha ee dibadda, si looga hortago in biyaha iyo qoyaanku ay yareeyaan xoogga fiber optic-ga iyo kordhinta khasaaraha gudbinta ee saameeya tayada isgaarsiinta, waxaa lagama maarmaan ah in lagu buuxiyo tuubada dabacsan ee fiilada indhaha ee qalabka biyaha xannibaya sida. Fiber-buuxinta jel si loo gaadho saamaynta xidhidhiyaha iyo biyo-ilaalinta, ka-hortagga walbahaarka, iyo ilaalinta fiber-ka indhaha.Tayada gelitaanka fiilada indhaha ee buuxinta jel waxay si toos ah u saameynaysaa xasilloonida waxqabadka gudbinta fiber-ka iyo nolosha fiilada indhaha.
Waxaan ku siin karnaa noocyo kala duwan oo ah jel buuxinta fiber-ka, oo ay ku jiraan jel buuxinta fiber-ka caadiga ah (ku habboon buuxinta agagaarka fiilooyinka indhaha ee tuubada dabacsan ee caadiga ah), buuxinta jel ee xargaha fiber-ka indhaha (ku habboon buuxinta agagaarka xargaha fiber-ka indhaha), hydrogen-nuugista indhaha jel fiber (ku habboon buuxinta agagaarka jel fiber indhaha ee tuubada birta) iwm,.
Gelitaanka fiber indhaha ee ay bixiso shirkadeena waxay leedahay xasillooni kiimikaad oo wanaagsan, xasilloonida heerkulka, biyo-celinta, thixotropy, kobcinta hydrogen ugu yar, xumbo yar, ku habboonaanta fiilooyinka indhaha iyo tuubooyinka dabacsan, waana wax aan sun ahayn oo aan waxyeello u geysan dadka.
Codsiga
Inta badan waxaa loo isticmaalaa buuxinta tuubooyinka dabacsan ee caagga ah iyo tuubooyinka dabacsan ee birta ah ee fiilada indhaha ee bannaanka ah, fiilada indhaha ee OPGW iyo alaabo kale.
| Maya | Shayga | Unug | Tusmada |
| 1 | Muuqashada | / | Homogeneous, aan wasakh ahayn |
| 2 | Barta tuurista | ℃ | ≥150 |
| 3 | Cufnaanta (20 ℃) | g:cm3 | 0.84±0.03 |
| 4 | Galitaanka kolayga25℃－40℃ | 1 : 10mm | 600± 30 |
| ≥230 | |||
| 5 | Degganaanshaha midabka (130 ℃, 120h) | / | ≤2.5 |
| 6 | Waqtiga soo saarista oksaydhisku (10 ℃ ／ daqiiqo, 190 ℃) | min | ≥30 |
| 7 | barta biliglaynaysa | ℃ | ＞200 |
| 8 | Kobcinta Hydrogen (80 ℃, 24h) | μl:g | ≤0.03 |
| 9 | Saliida oo socota (80 ℃, 24h) | % | ≤0.5 |
| 10 | Awoodda uumiga (80 ℃, 24h) | % | ≤0.5 |
| 11 | Biyo caabbinta (23℃,7×24h) | / | Kala diri la'aan |
| 12 | Qiimaha acid | mgK0H | ≤0.3 |
| 13 | Biyaha ku jira | % | ≤0.01 |
| 14 | Viscosity (25 ℃, D=50s-1) | mPa.s | 2000± 1000 |
| 15 | Waafaqid: A, oo leh fiber optic, fiber indhaha Ribbons dahaarka alaabta (85 ℃ ± 1 ℃, 30 × 24h) B, oo leh walxo tubooyinka dabacsan (85℃±1℃,30×24h) kala duwanaanshaha xoogga xajinta Jabinta dheeraynta kala duwanaansho ballaaran | % | Ma dhoco, guuritaan, delamination, dildilaac Awoodda ugu badan ee la sii daayo:1.0N～8.9N Celceliska qiimaha:1.0N ~ 5.0N Ma jiro delamination, dillaac ≤25 ≤30 ≤3 |
| 16 | Corrosive (80 ℃, 14 × 24h) oo leh naxaas, aluminium, bir | / | Ma jiraan dhibco daxalka |
| Talooyin: ku habboon buuxinta fiilo yar ama dhexroor yar oo fiilada fiber optic-ga ah ee dabacsan. | |||
Qiyaasta Farsamada
| Nooca OW-210 jel buuxinta fiber indhaha ee tuubada dabacsan ee caadiga ah | |||
| Maya | Shayga | Unug | Tusmada |
| 1 | Muuqashada | / | Homogeneous, aan wasakh ahayn |
| 2 | Barta tuurista | ℃ | ≥200 |
| 3 | Cufnaanta (20 ℃) | g/cm3 | 0.83 ± 0.03 |
| 4 | Galitaanka kolayga 25℃ -40 ℃ | 1/10mm | 435±30 ≥230 |
| 5 | Degganaanshaha midabka (130 ℃, 120h) | / | ≤2.5 |
| 6 | Waqtiga soo saarista oksaydhisku (10 ℃/daqiiqo, 190 ℃) | min | ≥30 |
| 7 | barta biliglaynaysa | ℃ | ＞200 |
| 8 | Kobcinta Hydrogen (80 ℃, 24h) | μl/g | ≤0.03 |
| 9 | Saliida soo socota (80 ℃, 24h) | % | ≤0.5 |
| 10 | Awoodda uumiga (80 ℃, 24h) | % | ≤0.5 |
| 11 | Iska caabinta biyaha (23℃,7×24h) | / | Kala diri la'aan |
| 12 | Qiimaha acid | mgK0H/g | ≤0.3 |
| 13 | Biyaha ku jira | % | ≤0.01 |
| 14 | Viscosity (25℃, D=50s-1) | mPa.s | 4600± 1000 |
| 15 | Waafaqid: A, oo leh fiber indhaha, wax daahan fiber indhaha (85 ℃ ± 1 ℃, 30 × 24h) B, oo leh walxo dabacsan (85℃±1℃,30×24h) kala duwanaanshaha xoogga xajinta Jabinta dheeraynta kala duwanaansho ballaaran | % % % | Ma dhoco, guuritaan, delamination, dildilaac Awoodda ugu badan ee la sii daayo:1.0N～8.9N Celceliska qiimaha:1.0N ~ 5.0N Ma jiro delamination, dildilaaca≤25 ≤30 ≤3 |
| 16 | Burbursan(80℃,14×24h) oo leh naxaas, aluminium, bir | / | Ma jiraan dhibco daxalka |
| Talooyin: ku habboon buuxinta tuubada dabacsan ee caadiga ah. | |||
Nooca OW-220 jel buuxinta fiber indhaha | |||
| Maya | Shayga | Unug | Halbeegyada |
| 1 | Muuqashada | / | Homogeneous, aan wasakh ahayn |
| 2 | Barta tuurista | ℃ | ≥150 |
| 3 | Cufnaanta (20 ℃) | g:cm3 | 0.84±0.03 |
| 4 | Galitaanka kolayga 25℃－40℃ | 1 : 10mm | 600± 30 |
| ≥230 | |||
| 5 | Degganaanshaha midabka (130 ℃, 120h) | / | ≤2.5 |
| 6 | Waqtiga soo saarista oksaydhisku (10 ℃ ／ daqiiqo, 190 ℃) | min | ≥30 |
| 7 | barta biliglaynaysa | ℃ | ＞200 |
| 8 | Kobcinta Hydrogen (80 ℃, 24h) | μl:g | ≤0.03 |
| 9 | Saliida oo socota (80 ℃, 24h) | % | ≤0.5 |
| 10 | Awoodda uumiga (80 ℃, 24h) | % | ≤0.5 |
| 11 | Biyo caabbinta (23℃,7×24h) | / | Kala diri la'aan |
| 12 | Qiimaha acid | mgK0H | ≤0.3 |
| 13 | Biyaha ku jira | % | ≤0.01 |
| 14 | Viscosity (25 ℃, D=50s-1) | mPa.s | 2000± 1000 |
| 15 | Waafaqid: A, oo leh fiber indhaha, wax daahan fiber indhaha (85 ± 1 ℃, 30 × 24h) B, oo leh wax tuubooyinka dabacsan (85 ℃ ± 1 ℃, 30 × 24h) kala duwanaanshiyaha xoojinta xoojinta jebinta elongation | % | Ma dhoco, guuritaan, delamination, dildilaac |
| kala duwanaansho ballaaran | % | Awoodda ugu badan ee la sii daayo:1.0N～8.9N | |
| % | Celceliska qiimaha:1.0N ~ 5.0N | ||
| Ma jiro delamination, dillaac | |||
| ≤25 | |||
| ≤30 | |||
| ≤3 | |||
| 16 | Corrosive (80 ℃, 14 × 24h) oo leh naxaas, aluminium, bir | / | Ma jiraan dhibco daxalka |
| Talooyin: ku habboon buuxinta fiilo-yar ama dhexroor yar oo fiilada fibre-galaha ah ee dabacsan. | |||
OW-230 nooca ribbon optic fiber buuxin jel | |||
| Maya | Shayga | Unug | Halbeegyada |
| 1 | Muuqashada | / | Homogeneous, aan wasakh ahayn |
| 2 | Barta tuurista | ℃ | ≥200 |
| 3 | Cufnaanta (20 ℃) | g:cm3 | 0.84±0.03 |
| 4 | Galitaanka kolayga 25℃－40℃ | 1 : 10mm | 400± 30 |
| ≥220 | |||
| 5 | Degganaanshaha midabka (130 ℃, 120h) | / | ≤2.5 |
| 6 | Waqtiga soo saarista oksaydhisku (10 ℃ ／ daqiiqo, 190 ℃) | min | ≥30 |
| 7 | barta biliglaynaysa | ℃ | ＞200 |
| 8 | Kobcinta Hydrogen (80 ℃, 24h) | μl:g | ≤0.03 |
| 9 | Saliida oo socota (80 ℃, 24h) | % | ≤0.5 |
| 10 | Awoodda uumiga (80 ℃, 24h) | % | ≤0.5 |
| 11 | Biyo caabbinta (23℃,7×24h) | / | Kala diri la'aan |
| 12 | Qiimaha acid | mgK0H | ≤0.3 |
| 13 | Biyaha ku jira | % | ≤0.01 |
| 14 | Viscosity (25 ℃, D=50s-1) | mPa.s | 8000±2000 |
| 15 | Waafaqid: A, oo leh fiber optic, fiber optic maaddada dahaarka ee ribbons (85℃ ± 1℃, 30×24h) B, oo leh walxo tubooyinka dabacsan (85℃ ± 1℃, 30×24h) kala duwanaanshaha xoogga xajinta Jabinta dheeraynta kala duwanaansho ballaaran | % % % % % % % | Ma dhoco, guuritaan, delamination, dildilaac Awoodda ugu badan ee la sii daayo:1.0N～8.9N Celceliska qiimaha:1.0N ~ 5.0N Ma jiro delamination, dillaac ≤25 ≤30 ≤3 |
| 16 | Burbursan (80℃, 14×24h) | / | Ma jiraan dhibco daxalka |
| oo leh naxaas, aluminium, bir | |||
| Talooyin: ku habboon buuxinta tuubada dabacsan ee caadiga ah. | |||
Baakadaha
Gel-buuxinta fiber indhaha ayaa lagu heli karaa laba nooc oo baakad ah.
1) 170kg / durbaan
2) 800kg/IBC haanta
Kaydinta
1) Alaabta waa in lagu hayaa meel nadiif ah, nadiif ah, qalalan oo hawo leh.
2) Alaabta waa in laga fogeeyo meelaha kulaylka ah, waa in aan lagu dhex ridin alaab gubanaysa, waana in aan loo dhawaan ilaha dabka.
3) Alaabta waa in ay ka fogaato iftiinka qoraxda iyo roobka.
4) Alaabta waa in si buuxda loo buuxiyaa si looga fogaado qoyaanka iyo wasakhowga.
5) Muddada kaydinta alaabta ee heerkulka caadiga ah waa 3 sano laga bilaabo taariikhda wax soo saarka.
Shahaado
SHURUUDAHA MUUSADAHA BILAASHKA AH
HAL ADDUUN waxa ay ka go'an tahay in ay macaamiisha siiso silig tayo sare leh iyo agabka fiilada iyo adeegyada ugu horeeya
Waxaad codsan kartaa muunad bilaash ah oo ah alaabta aad xiisaynayso taas oo macnaheedu yahay inaad diyaar u tahay inaad u isticmaasho alaabtayada wax soo saarka
Waxaan Isticmaalnaa Kaliya Xogta Tijaabada Ah Ee Aad Rabto U Tahay Inaad Soo Celiso Oo La Wadaagto Sida Xaqiijinta Tilmaamaha Alaabta Iyo Tayada , Ka dibna Nagu Caawi Inaan Dhisno Nidaam Xakamaynta Tayada Oo Dhamaystiran si aan u wanaajino Kalsoonida Macaamiisha iyo Ujeedada Iibka
Waxaad buuxin kartaa foomka Xaqqa aad u leedahay inaad ku codsato muunad bilaash ah
Tilmaamaha Codsiga
11 .Macmiilku waxa uu leeyahay Akoon Bixinta Degdegga ah ee Caalamiga ah ama si ikhtiyaari ah ayuu u bixiyaa xamuulka ( Xamuulka waxa lagu soo celin karaa dalabka)
2018-03-21Isla hay'ad la mid ah waxay codsan kartaa oo keliya hal muunad bilaash ah oo isla badeecad ah, isla hay'ad la mid ah waxay codsan kartaa ilaa shan koob oo alaabooyin kala duwan ah hal sano gudaheed
3 .Tusaalaha waxaa loogu talagalay oo keliya Macaamiisha Wershadaha Xadhkaha iyo Xadhkaha, iyo Kaliya Shakhsiyaadka Shaybaadhka ee Imtixaanka Wax soo saarka ama Cilmi-baarista
MUUSUUL BACKING
FOOMKA CODSIGA TUSAALE BILAASH AH
Fadlan Geli Tilmaanta Tusaalaha Loo Baahan Yahay , Ama Si Kooban U Sharax Shuruudaha Mashruuca , Waxaan Kugula Talin Doonaa Muunooyin
Kadib gudbinta foomka, macluumaadka aad buuxisay waxa laga yaabaa in loo gudbiyo asalka HAL ADDUUNKA si loo sii habeeyo si loo go'aamiyo qeexida badeecada iyo ciwaanka adiga kula jira.Waxa kale oo laga yaabaa in uu kugula soo xiriiro telefoon.Fadlan akhri qoraalkayagaQaanuunka Arrimaha Khaaska ahFaahfaahin dheeraad ah.