Aluminum Foil Polyethylene Tape

ONE WORLD Quality Management: Aluminum Foil Polyethylene Tape

ONE WORLD exported a batch of aluminum foil polyethylene tape, the tape is mainly used to prevent signal leakage during the transmission of signals in coaxial cables, the aluminum foil plays an emitting and refracting role and has a good shielding effect. The self-adhesive copolymer side is 100% longitudinally bonded to the foamed polyethylene insulator.

We would like to share with you the quality inspection work that we do for appearance, size, color, performance, packaging, etc. during the production process and before shipment in accordance with customer requirements and industry standards.

1.Appearance Confirmation
(1)The aluminum foil polyethylene tape should be continuously and tightly laminated, and its surface should be smooth, flat, uniform, free of impurities, wrinkles, spots, and other mechanical damage.

Aluminum Foil Polyethylene Tape2

Laminating Process of  Aluminum Foil Polyethylene Tape

(2) Aluminum foil polyethylene tape should be wound tightly and should not collapse when used vertically.
(3) The unslitted aluminum foil polyethylene tape is allowed to have 2~5mm plastic film protection on the side, and the side should be flat, without defects such as rolled edge, gap and burr, and the misalignment between layers is less than 1mm.
(4) The end face of the slit aluminum foil polyethylene tape should be flat, with an unevenness of not more than 0.5mm, and should be free of rolled edges, gaps, knife marks, burrs and other mechanical damage. When the aluminum foil polyethylene tape is put on the tape, it is not self-adhesive, and the edge should be free of obvious wavy shape (commonly known as ruffled edge).

2.Size Confirmation
(1) The width, total thickness, thickness of aluminum foil, thickness of polyethylene, and inner and outer diameter of the wrapping tape of aluminum foil and polyethylene meet customer requirements.

Aluminum Foil Polyethylene Tape1

Size Test of Aluminum Foil Polyethylene Tape

(2) No joint is allowed in the same tray of metal-plastic composite foil that has been slit and the same roll of metal-plastic composite foil that has not been slit.

Aluminum Foil Polyethylene Tape3

Sliting Process of Aluminum Foil Polyethylene Tape

3. Color Confirmation
Aluminum foil polyethylene tape color should be consistent with customer requirements.

4. Performance Confirmation
The tensile strength and elongation at break of the aluminum foil polyethylene tape were tested, and the test results met industry standards and customer requirements.

Aluminum Foil Polyethylene Tape

Tensile Strength Test of Aluminum Foil Polyethylene Tape

5. Packaging Confirmation
(1) The aluminum foil polyethylene tape should be tightly wound on the tube core made of plastic, the length of the core of the slit aluminum foil polyethylene tape should be the same as the width of the composite foil, the end of the tube core protruding from the aluminum foil polyethylene tape should be less than 1mm, and the end of the aluminum foil polyethylene tape should be fixed firmly to prevent loosening.

Packaging

Packing of Aluminum Foil Polyethylene Tape

(2) The slit aluminum foil polyethylene tape should be placed flat and several trays form a package.

These requirements are our basic requirements for aluminum foil polyethylene tape before leaving the factory, we will ensure that the quality of each batch of products meet customer requirements and industry standards, to provide each customer with quality products and services, welcome to contact us at any time.

FREE SAMPLE TERMS

ONE WORLD Is Committed To Providing Customers With Industleading High-Quality Wire And Cable Matenals And First-Classtechnical Services

You Can Request A Free Sample Of The Product You Are Interested Inwhich Means You Are Willing To Use Our Product For Production
We Only Use The Experimental Data You Are Willing To Feedback Andshare As The Verification Of Product Characteristics And Quality , Andthen Help Us To Establish A More Complete Quality Control System Toimprove Customers’ Trust And Purchase Intention , So Please Restassured
You Can Fill Out The Form On The Right To Request A Free Sample

Application Instructions
1 . The Customer Has An International Express Delivery Account Orvoluntarily Pays The Freight ( The Freight Can Be Returned In The Order )
2 . The Same Institution Can Only Apply For One Free Sample Of Thesame Product , And The Same Institution Can Apply For Up To Fivesamples Of Different Products For Free Within One Year
3 . The Sample Is Only For Wire And Cable Factory Customers , And Onlyfor Laboratory Personnel For Production Testing Or Research

SAMPLE PACKAGING

Aluminum-Foil-for-Food-Packaging
Aluminum-Foil-for-Food-Packaging

FREE SAMPLE REQUEST FORM

Please Enter The Required Sample Specifications , Or Briefly Describe Theproject Requirements , We Will Recommend Samples For You

After submitting the form , the information you fill in may be  transmitted to the ONE WORLD background for further processed to determine product specification and address information with you. And may also contact you by telephone. Please read our Privacy Policy  For more details.

Thank you for your inquiry