Ngwaahịa
Ngwa anya Fiber na-ejuputa Gel - Fiber Gel
Okwu Mmalite ngwaahịa
Ngwa anya eriri na-ejuputa gel bụ ihe na-acha ọcha translucent mado, nke mejupụtara isi mmanụ, inorganic filler, thickener, regulator, antioxidant, wdg, kpụ ọkụ n'ọnụ n'ókè ụfọdụ na homogenized na a ketulu mmeghachi omume, na mgbe ahụ colloid egweri, jụrụ na degassing.
Maka eriri anya n'èzí, iji gbochie mmiri na mmiri ka ọ ghara ibelata ike nke eriri anya na ịba ụba nke nnyefe nke na-emetụta àgwà nkwurịta okwu, ọ dị mkpa iji mejupụta tube na-adịghị ahụkebe nke eriri anya na ihe mgbochi mmiri dị ka mmiri. Optical fiber filling gel iji nweta mmetụta nke mkpuchi na mkpuchi mmiri, mgbochi nchekasị, na ichekwa eriri anya.Ogo nke fiber optic filling gel na-emetụta ozugbo nkwụsi ike nke arụmọrụ nnyefe eriri anya na ndụ nke eriri anya.
Anyị nwere ike ịnye ụdị gel dị iche iche nke fiber na-ejuputa, tumadi gụnyere ihe eji eme fiber optical nkịtị (nke dabara maka imeju eriri anya na tube nkịtị), na-ejuputa gel maka eriri eriri anya (nke dabara maka imeju gburugburu eriri eriri anya), ngwa anya hydrogen na-anabata. eriri gel (dị mma maka ijuputa gburugburu eriri eriri anya na tube metal) wdg,.
The Optical fiber gel nyere site na ụlọ ọrụ anyị nwere ezigbo nkwụsi ike nke kemịkalụ, nkwụsi ike nke okpomọkụ, mmiri na-egbochi mmiri, thixotropy, evolushọn hydrogen kacha nta, obere egosipụta, ezigbo ndakọrịta na eriri anya na tubes rụrụ arụ, na-adịghị egbu egbu na adịghị emerụ ahụ mmadụ.
Ngwa
A na-ejikarị emeju tubes rọba na igwe anaghị agba nchara nke eriri igwe anya dị n'èzí, eriri anya OPGW na ngwaahịa ndị ọzọ.
| Mba. | Ihe | Nkeji | Index |
| 1 | Ọdịdị | / | Homogeneous, enweghị adịghị ọcha |
| 2 | Ebe nkwụsị | ℃ | ≥150 |
| 3 | Njupụta (20 ℃) | g:cm3 | 0.84± 0.03 |
| 4 | Ntinye cone25℃ ~ 40℃ | 1:10mm | 600± 30 |
| ≥230 | |||
| 5 | Nkwụsi ike nke agba (130 ℃, 120h) | / | ≤2.5 |
| 6 | Oge nnabata Oxidation (10℃／min,190℃) | min | ≥30 |
| 7 | Ebe na-egbuke egbuke | ℃ | ＞200 |
| 8 | Hydrogen evolushọn (80 ℃, 24h) | μl:g | ≤0.03 |
| 9 | Mmanụ na-agbapụta (80 ℃, 24h) | % | ≤0.5 |
| 10 | Ike evaporation (80 ℃, 24h) | % | ≤0.5 |
| 11 | Mmiri na-eguzogide (23 ℃, 7 × 24h) | / | Enweghị ikewapụ |
| 12 | Uru acid | mgK0H (g | ≤0.3 |
| 13 | Ọdịnaya mmiri | % | ≤0.01 |
| 14 | Viscosity (25 ℃, D = 50s-1) | mPa.s | 2000± 1000 |
| 15 | ndakọrịta: A, na ngwa anya eriri, ngwa anya eriri Ribbons mkpuchi ihe (85 ℃ ± 1 ℃, 30 × 24h) B, na rụrụ tubes ihe (85℃ ± 1℃, 30×24h) mgbanwe na ike tensile Na-agbaji elongation uka mgbanwe | % | Enweghị nkụda mmụọ, mbugharị, delamination, cracking Ike ntọhapụ kacha: 1.0N ~ 8.9N Nkezi uru:1.0N ~ 5.0N Enweghị delamination, cracking ≤25 ≤30 ≤3 |
| 16 | Corrosive (80 ℃, 14 × 24h) na ọla kọpa, aluminum, ígwè | / | Enweghị ntụpọ corrosion |
| Ndụmọdụ: dabara adaba maka ijuputa micro cable ma ọ bụ obere dayameta rụrụ tube fiber optic cable. | |||
Nka nka
| OW-210 ụdị ngwa anya fiber na-ejuputa gel maka tube nkịtị | |||
| Mba. | Ihe | Nkeji | Index |
| 1 | Ọdịdị | / | Homogeneous, enweghị adịghị ọcha |
| 2 | Ebe nkwụsị | ℃ | ≥200 |
| 3 | Njupụta (20 ℃) | g/cm3 | 0.83± 0.03 |
| 4 | Ntinye cone 25 ℃ -40 ℃ | 1/10mm | 435±30 ≥230 |
| 5 | Nkwụsi ike nke agba (130 ℃, 120h) | / | ≤2.5 |
| 6 | Oge nnabata Oxidation (10℃/min,190℃) | min | ≥30 |
| 7 | Ebe na-egbuke egbuke | ℃ | ＞200 |
| 8 | Evolushọn hydrogen (80 ℃, 24h) | μl/g | ≤0.03 |
| 9 | Mmanụ na-agba ọsọ (80 ℃, 24h) | % | ≤0.5 |
| 10 | Ike evaporation (80 ℃, 24h) | % | ≤0.5 |
| 11 | Mmiri na-eguzogide (23 ℃, 7 × 24h) | / | Enweghị ikewapụ |
| 12 | Uru acid | mgK0H/g | ≤0.3 |
| 13 | Ọdịnaya mmiri | % | ≤0.01 |
| 14 | Viscosity (25 ℃, D=50s-1) | mPa.s | 4600± 1000 |
| 15 | ndakọrịta: A, na ngwa anya eriri, ngwa anya eriri rịbọn mkpuchi ihe (85 ℃ ± 1 ℃, 30 × 24h) B, na rụrụ tubes ihe onwunwe (85℃ ± 1℃, 30×24h) mgbanwe na ike tensile Na-agbaji elongation uka mgbanwe | % % % | Enweghị nkụda mmụọ, mbugharị, delamination, cracking Ike ntọhapụ kacha: 1.0N ~ 8.9N Nkezi uru:1.0N ~ 5.0N Enweghị delamination, cracking≤25 ≤30 ≤3 |
| 16 | Na-emebi emebi (80 ℃, 14 × 24h) na ọla kọpa, aluminum, ígwè | / | Enweghị ntụpọ corrosion |
| Atụmatụ: adabara na-ejuputa na nkịtị rụrụ tube. | |||
OW-220 ụdị micro optical fiber na-ejuputa gel | |||
| Mba. | Ihe | Nkeji | Oke |
| 1 | Ọdịdị | / | Homogeneous, enweghị adịghị ọcha |
| 2 | Ebe nkwụsị | ℃ | ≥150 |
| 3 | Njupụta (20 ℃) | g:cm3 | 0.84± 0.03 |
| 4 | Ntinye cone 25℃ ~ 40℃ | 1:10mm | 600± 30 |
| ≥230 | |||
| 5 | Nkwụsi ike nke agba (130 ℃, 120h) | / | ≤2.5 |
| 6 | Oge nnabata Oxidation (10℃／min,190℃) | min | ≥30 |
| 7 | Ebe na-egbuke egbuke | ℃ | ＞200 |
| 8 | Hydrogen evolushọn (80 ℃, 24h) | μl:g | ≤0.03 |
| 9 | Mmanụ na-agbapụta (80 ℃, 24h) | % | ≤0.5 |
| 10 | Ike evaporation (80 ℃, 24h) | % | ≤0.5 |
| 11 | Mmiri na-eguzogide (23 ℃, 7 × 24h) | / | Enweghị ikewapụ |
| 12 | Uru acid | mgK0H (g | ≤0.3 |
| 13 | Ọdịnaya mmiri | % | ≤0.01 |
| 14 | Viscosity (25 ℃, D = 50s-1) | mPa.s | 2000± 1000 |
| 15 | ndakọrịta: A, na ngwa anya eriri, ngwa anya eriri rịbọn mkpuchi ihe (85 ± 1 ℃, 30 × 24h) B, na rụrụ tubes ihe (85 ℃ ± 1 ℃, 30 × 24h) mgbanwe na tensile ike na-emebi elongation | % | Enweghị nkụda mmụọ, mbugharị, delamination, cracking |
| uka mgbanwe | % | Ike ntọhapụ kacha: 1.0N ~ 8.9N | |
| % | Nkezi uru:1.0N ~ 5.0N | ||
| Enweghị delamination, cracking | |||
| ≤25 | |||
| ≤30 | |||
| ≤3 | |||
| 16 | Corrosive (80 ℃, 14 × 24h) na ọla kọpa, aluminum, ígwè | / | Enweghị ntụpọ corrosion |
| Ndụmọdụ: kwesịrị ekwesị maka ijuputa micro cable ma ọ bụ obere dayameta rụrụ tube eriri gel optic cable. | |||
OW-230 ụdị ribbon optical fiber na-ejuputa gel | |||
| Mba. | Ihe | Nkeji | Oke |
| 1 | Ọdịdị | / | Homogeneous, enweghị adịghị ọcha |
| 2 | Ebe nkwụsị | ℃ | ≥200 |
| 3 | Njupụta (20 ℃) | g:cm3 | 0.84± 0.03 |
| 4 | Ntinye cone 25℃ ~ 40℃ | 1:10mm | 400±30 |
| ≥220 | |||
| 5 | Nkwụsi ike nke agba (130 ℃, 120h) | / | ≤2.5 |
| 6 | Oge nnabata Oxidation (10℃／min,190℃) | min | ≥30 |
| 7 | Ebe na-egbuke egbuke | ℃ | ＞200 |
| 8 | Hydrogen evolushọn (80 ℃, 24h) | μl:g | ≤0.03 |
| 9 | Mmanụ na-agbapụta (80 ℃, 24h) | % | ≤0.5 |
| 10 | Ike evaporation (80 ℃, 24h) | % | ≤0.5 |
| 11 | Mmiri na-eguzogide (23 ℃, 7 × 24h) | / | Enweghị ikewapụ |
| 12 | Uru acid | mgK0H (g | ≤0.3 |
| 13 | Ọdịnaya mmiri | % | ≤0.01 |
| 14 | Viscosity (25 ℃, D = 50s-1) | mPa.s | 8000± 2000 |
| 15 | ndakọrịta: A, na ngwa anya eriri, ngwa anya eriri ihe mkpuchi rịbọn 85℃± 1℃,30×24h) B, na rụrụ tubes ihe 85℃± 1℃,30×24h) mgbanwe na ike tensile Na-agbaji elongation uka mgbanwe | % % % % % % % | Enweghị nkụda mmụọ, mbugharị, delamination, cracking Ike ntọhapụ kacha: 1.0N ~ 8.9N Nkezi uru:1.0N ~ 5.0N Enweghị delamination, cracking ≤25 ≤30 ≤3 |
| 16 | Na-emebi emebi (80 ℃, 14 × 24h) | / | Enweghị ntụpọ corrosion |
| na ọla kọpa, aluminum, ígwè | |||
| Atụmatụ: adabara na-ejuputa na nkịtị rụrụ tube. | |||
Nkwakọ ngwaahịa
Gel na-ejuputa eriri anya dị na ụdị nkwakọ ngwaahịa abụọ.
1) 170kg / drum
2) 800kg / IBC tank
Nchekwa
1) Ekwesịrị idobe ngwaahịa ahụ n'ụlọ nkwakọba ihe dị ọcha, dị ọcha, kpọrọ nkụ na ikuku.
2) Ekwesịrị idobe ngwaahịa ahụ pụọ na isi mmalite okpomọkụ, e kwesịghị ikpokọta ya na ngwaahịa ndị na-ere ọkụ ma ghara ịdị nso na isi mmalite ọkụ.
3) Ngwaahịa kwesịrị izere ìhè anyanwụ kpọmkwem na mmiri ozuzo.
4) Ekwesịrị ịkwakọ ngwaahịa ahụ kpamkpam iji zere mmiri na mmetọ.
5) Oge nchekwa nke ngwaahịa na okpomọkụ nkịtị bụ afọ 3 site na ụbọchị mmepụta.
Asambodo
OKWU Nlereanya efu
Otu ụwa na-agba mbọ inye ndị ahịa ihe na-arụ ọrụ waya na ihe igwe dị elu yana ọrụ izizi nke mbụ.
Ị nwere ike ịrịọ ihe nlele efu nke ngwaahịa a masịrị gị nke pụtara na ị dị njikere iji ngwaahịa anyị maka mmepụta
We Only Use The Experimental Data You Are Willing To Feedback Andshare As The Verification Of Product Characteristics And Quality , Andthen Help Us To Establish A More Complete Quality Control System Toimprove Customers' Trust And Purchase Intention , Ya mere, Biko Restassured
Ị nwere ike dejupụta fọm n'aka nri iji rịọ maka nlele efu
Ntuziaka ngwa
1 .Onye ahịa ahụ nwere Akaụntụ Nnyefe Express International ma ọ bụ na-akwụ ụgwọ ibu ahụ ( Enwere ike iweghachite ibu ahụ n'usoro)
2 .Otu ụlọ ọrụ ahụ nwere ike itinye akwụkwọ maka otu nlele efu nke ngwaahịa Thesame, na otu ụlọ ọrụ ahụ nwere ike itinye akwụkwọ maka ihe ruru Fivesamples nke ngwaahịa dị iche iche n'efu n'ime otu afọ.
3 .The sample bụ naanị maka waya na USB Factory ahịa , na naanị maka Laboratory Personnel maka Production Testing ma ọ bụ Research
Nkwakọ ngwaahịa
Fọọm arịrịọ Nlereanya efu
Biko tinye nkọwapụta ihe nlele achọrọ, ma ọ bụ kọwapụta nkenke ihe achọrọ achọrọ, anyị ga-akwado gị nlele.
Mgbe ịnyefe fọm ahụ, enwere ike ibunye ozi ị dejupụtara na ndabere ụwa maka nhazi ọzọ iji chọpụta nkọwapụta ngwaahịa yana ozi adreesị gị.Ọ nwekwara ike ịkpọtụrụ gị site na ekwentị.Biko gụọ nke anyịamụma nzuzoMaka nkọwa ndị ọzọ.