Product

Factory wholesale Semi-Conductive Filler Rope - Water Blocking Filler Rope for Wire and Cable – ONE WORLD


Free Sample Terms

Sample Packaging

free sample request form

Fill in the form below withsample needs ONE WORLDprofessional technical engineers will contact you within 24 hours .

Please enter the required sample specifications , or briefly describe theproject requirements , we will recommend samples for you

product description

, , ,
Factory wholesale Semi-Conductive Filler Rope - Water Blocking Filler Rope for Wire and Cable – ONE WORLD Detail:

1. Product Introduction

The water blocking filling rope is a kind of water blocking material used in cables which is made of polyester fiber non-woven fabric and super absorbent resin through impregnation, bonding, drying, and finally twisting.This rope has characteristics with water resistance, heat resistance and chemical stability, no acid and alkali, no corrosion,large water absorption capacity, high tensile strength, low moisture content, etc.
Normally, outdoor cables are laid in a damp and dark environment. If damaged, the water will flow into the cable along the damage point and affect the cable by changing the capacitance of the cable and reduce the signal transmission strength. The XLPE insulated power cables will generate water branches, which will seriously cause insulation breakdown. Therefore, in order to prevent water from entering into the cable, some waterproof materials will be filled or wrapped inside the cable. The water-blocking filling rope is one of the most commonly used water-blocking filling materials because of its strong water-absorbing capacity. At the same time, the water-blocking filling rope can make the cable core round and improve the cable appearance quality and increase the cable tensile performance. It can not only block the water, but also fill the cable.
The water-blocking filling rope we provide has the following characteristics:
1) Soft texture, free bending, light bending, no delamination powder;
2) Uniform twist and stable outer diameter;
3) The gel is uniform and stable after expansion;
4) Unloose winding.

2. Application

It is suitable for filling water resistance type power cables, marine cables, etc.

3. Technical Parameters

Model

Nominal diameter (mm)

Water absorbing capacity

(ml/g)

Pulling strength

N/20cm

Breaking elongation (%)

Moisture content

(%)

ZSS-20

2.0

≥50

≥50

≥15

≤9

ZSS-25

2.5

≥50

≥50

≥15

≤9

ZSS-30

3.0

≥50

≥60

≥15

≤9

ZSS-40

4.0

≥50

≥60

≥15

≤9

ZSS-50

5.0

≥50

≥60

≥15

≤9

ZSS-60

6.0

≥50

≥90

≥15

≤9

ZSS-70

7.0

≥50

≥90

≥15

≤9

ZSS-90

9.0

≥50

≥90

≥15

≤9

ZSS-100

10.0

≥50

≥100

≥15

≤9

ZSS-120

12.0

≥50

≥100

≥15

≤9

ZSS-160

16.0

≥50

≥150

≥15

≤9

ZSS-180

18.0

≥50

≥150

≥15

≤9

ZSS-200

20.0

≥50

≥200

≥15

≤9

ZSS-220

22.0

≥50

≥200

≥15

≤9

ZSS-240

24.0

≥50

≥200

≥15

≤9

Note: In addition to the specifications in the table, we can also provide other specifications of water filling rope according to customers’ requirements.

4. Storage Method

1) The product shall be kept in a clean, dry and ventilated warehouse. It shall not be piled up with inflammable goods and shall not be near the fire source;
2) The product should avoid direct sunlight and rain;
3) The packaging of the product shall be complete to avoid contamination;
4) Products shall be protected from heavy weight, falls and other external mechanical damage during storage and transportation.


Product detail pictures:


Related Product Guide:

Factory wholesale Semi-Conductive Filler Rope - Water Blocking Filler Rope for Wire and Cable – ONE WORLD , The product will supply to all over the world, such as: , , ,

5 Stars By from -

5 Stars By from -

Related products

inquiry form

According To Your Needs,customize For You,And Provide You with Morevaluable Products.