Product

2020 Good Quality Peroxide Xlpe Insulation Compound - Non-woven Fabric Tape – ONE WORLD


Free Sample Terms

Sample Packaging

free sample request form

Fill in the form below withsample needs ONE WORLDprofessional technical engineers will contact you within 24 hours .

Please enter the required sample specifications , or briefly describe theproject requirements , we will recommend samples for you

product description

, , ,
2020 Good Quality Peroxide Xlpe Insulation Compound - Non-woven Fabric Tape – ONE WORLD Detail:

1. Product Introduction

The non-woven fabric tape is made of synthetic fibers as the raw material, in which the fiber webs of synthetic fibers are bonded and reinforced, then into non-woven fabric tape.
The non -woven fabric tape is widely used in the wire and cable industry. It can be used as the isolation layer, cushion layer and thermal protective layer for medium and low voltage power cables, rubber cables, control cables, communication cables and other types of cables and communication optical cables. During the cable processing, it can help to fix the cable core and ensure the separation within the extruded layers. It can also increase the mechanical strength and flexibility of optical cables and power cables.
The polyester thin non-woven fabric tape we provide is a ribbon-shaped material made of high-temperature resistant polyester fiber, which is impregnated, bonded, dried, and pressed. The fiber is fully combed and bonded, and then slit.
The non-woven fabric tapes we provide have the following characteristics:
1) The surface is flat, without wrinkles, notches, flashes, holes and other defects;
2) Good uniformity, no delamination;
3) Light weight, thin thickness and good flexibility;
4) High mechanical strength, easy for wrapping and longitudinal wrapping processing;
5) Good heat resistance, high instant temperature resistance, and the cable can maintain stable performance at instant high temperatures;
6) High chemical stability, no corrosive components, resistant to bacteria and mold erosion.

2. Application

It is suitable for the isolation layer, cushion layer and thermal protection layer of medium and low voltage power cables, rubber cables, control cables, communication cables and other types of cables and communication optical cables.

3. Technical Parameters

Nominal thickness

(mm)

Tensile strength

(N/cm)

Breaking elongation

(%)

Moisture content(%)

Long term stability

(℃)

Short term stability

(℃)

0.05

≥30

≥12

≤5

90

230

0.10

(Normal type)

≥35

≥12

≤5

90

230

0.10

(Enhanced type)

≥50

≥12

≤5

90

230

Note: The width and length of the non-woven fabric tapes can be provided according to customers’ requirements.

4. Storage Method

1) The product should be stored in a clean, hygienic, dry, and ventilated warehouse. It should not be stacked with flammable products and strong oxidants, and should not be near the fire source;
2) The product should avoid direct sunlight and rain;
3) The product should be packaged intact, avoid damp and contamination;
4) The product should be protected from heavy pressure, beating and other mechanical damage during storage and transportation.


Product detail pictures:


Related Product Guide:

2020 Good Quality Peroxide Xlpe Insulation Compound - Non-woven Fabric Tape – ONE WORLD , The product will supply to all over the world, such as: , , ,

5 Stars By from -

5 Stars By from -

Related products

inquiry form

According To Your Needs,customize For You,And Provide You with Morevaluable Products.